Ueli Steck Special Edition Knife

Our innovative blade provides two cutting options by placing aggressive serration at the base of blade and a straight edge at the tip. The blade securely locks in position and, even with gloves on, can be disengaged by depressing the Wenger cross or shifting the liner lock.

Partially serrated 65mm blade:

• Blade partially serrated offers two cutting options
• Relatively light due to the holes for the hexagonal keys
• Special wide design to integrate the three hexagonal keys

Single hand opening blade with safety lock:

• Easy and practical opening when only one hand is free
• Secure and safe
• Easy closing even with gloves on, through two ways of unlocking the blade: with the push button function (Wenger cross), or by shifting the liner lock.

Ultra secure. The blade securely locks in position and, even with gloves on, can be disengaged by depressing the Wenger cross or shifting the liner lock. Very cool.

To perform the unique duty of a wrench, we created a thick and wide blade to accommodate three hexagonal keys: This one is a 7mm (M4).

Check out the arrows on the 13mm hex. They indicate that the hardware should be rotated in this direction only. If the hardware is to be rotated in the opposite direction, then the knife should be flipped over (Wenger logo side down). This is safer and allows you to get the maximum amount of torque.

To perform the unique duty of a wrench, we created a thick and wide blade to accommodate three hexagonal keys: This one is an 10mm (M6).

Check out the arrows on the 13mm hex. They indicate that the hardware should be rotated in this direction only. If the hardware is to be rotated in the opposite direction, then the knife should be flipped over (Wenger logo side down). This is safer and allows you to get the maximum amount of torque.

To perform the unique duty of a wrench, we created a thick and wide blade to accommodate three hexagonal keys: This one is a 13mm (M8).

Check out the arrows on the 13mm hex. They indicate that the hardware should be rotated in this direction only. If the hardware is to be rotated in the opposite direction, then the knife should be flipped over (Wenger logo side down). This is safer and allows you to get the maximum amount of torque.

Built for Black Diamond® Ice Tools. Big and strong and positioned perfectly at the apex of the back of the blade, this screwdriver is for stubborn hardware and should only be used when the blade is closed.

Capable of cutting through aluminum or thin steel, repairing a tent spike, camp stove or doing whatever is asked of it makes this tool a valuable outdoor companion.

Ueli uses the file to sharpen the pick of his ice tool (axe!) and crampon points. He's also said it's great for filing down high spots on his nails before a rock climb. The file is 2-sided and fine (as opposed to coarse).

By integrating a 1/4” bit adapter into the handle each knife can use the included Philips head screwdriver bit (#3, 50mm) or Flat head screwdriver bit (0.6mm x 4.5mm, 50mm) or any of the many available to accomplish thousands of tasks.

When a summit celebration includes a round of beer, this tool stands tall.

A Wenger patented feature, this screwdriver locks into the body of the knife when pressure is applied so it will not fold accidently while working.

Yup. the least useful tool for Ueli, but we bet that you'll find a wire to strip or bend just to say that you one-up'd him!

A well-deserved meal is only moments away with this sharp and easy to use tool.

The lightweight pouch is neoprene and holds 3 bits (comes with 2), and will stay firmly by your side even in tough conditions.